Turnbuckle

£9.15

Rigging screw body with fork (and clevis pin) at each end**, manufactured from A4-AISI marine grade stainless steel. The sail is tensioned by screwing the turnbuckles in or out.

(** except for M6 hook-hook option)

Choose your size depending on the size of your sail. For extra strength over short distances use our single-end M8 turnbuckle.

For the full specification of each option, see the illustrations and descriptions below:

Description

PLEASE READ CAREFULLY BEFORE CHOOSING YOUR TURNBUCKLES

Adjustable fork to fork turnbuckle

M6 TURNBUCKLE – STANDARD
KSFX61CB
Suitable for indoor Shade Sails and external Shade Sails that are less than 8 sqm
Recommended link allowance = 170mm
M.B.L = 7.7Kn

Measurements L
Fully Tensioned 150mm
Half Tensioned 180mm
Fully Released 210mm

M8 TURNBUCKLE – STANDARD
KSFX81CB
Recommended link allowance = 210mm
M.B.L = 13.9Kn

Measurements L
Fully Tensioned 167mm
Half Tensioned 212mm
Fully Released 257mm

M8 TURNBUCKLE – SHORT
KSFX81SH
Recommended link allowance = 150mm
M.B.L = 13.9Kn

Measurements L
Fully Tensioned 122mm
Half Tensioned 140mm
Fully Released 165mm

M10 TURNBUCKLE – STANDARD
KSFX01CB
Recommended link allowance = 260mm
M.B.L = 21.08Kn

Measurements L
Fully Tensioned 190mm
Half Tensioned 240mm
Fully Released 290mm

Single-ended Turnbuckle

M8 TURNBUCKLE
KSFX8PBT
This turnbuckle is the strongest short tensioning fixing for smaller gaps between your Shade Sail and anchor point.
Recommended link allowance = 150mm
M.B.L = 13.9Kn

Measurements L
Fully Tensioned 122mm
Half Tensioned 144mm
Fully Released 157mm

Hook-Hook Turnbuckle

M6 HOOK- HOOK TURNBUCKLE
KSFXHH06
Open body rigging screw with hooks at each end, for ease of removal. Marine grade 316 stainless steel.
Tensioned as per the fork end turnbuckles and supplied with left & right hand nuts to lock either end of the open body, preventing the turnbuckle from winding loose.
Recommended link allowance = 190mm
M.B.L = 2.7Kn