Download Fixing Manual for more information (there are two manuals)
 Download Horizontal Fixing Guide |
Download Vertical Fixing Guide |
The rope and pulley fixing kits are rope kits that allow you to easily mount and remove your shade sail.
The vertical fixing kit rope and pulleys are arranged vertically down the post or wall. The shade can be adjusted or removed from ground level without the use of a ladder.
The horizontal kits are useful for ease of removal, and give an adjustable range between the shade and the post eye. For example the height of the shade can be adjusted up or down to avoid low sun if you set up 2 or 3 eyebolts down the post
These are suitable for Shade Sails up to approximately 10 sqm, with the longest side being a maximum of 3.5m – 4.0m
HORIZONTAL FIXING KIT KSFX50PL
Horizonal fixing kits provide an easy method of rigging and remove your Shade Sail. The kit is deconstructed on arrival and is a combination of the fixings listed below.
- 1 x Pulley Block (Plain Block)
KSFXPBT1 - 1 x Pulley Block (with Beckett)
KSFXPBT2 - 2 x Carbine Hook
KSFX9060 - 1 x Cross End Cleat
KSFX414D - 1 x Length of braided rope
KSFX5MWW
VERTICAL FIXING KIT KSFX60VPL
Vertical fixing kits are our more user friendly adjustable rope kit. The kit has 3 spliced pieces of rope, arranged on a pulley system which runs vertically down the post or wall which allows the shade to be tensioned closer to your desired anchorage point. This method is also adjustable and easily erected or removed from ground level.
- 1 x Pulley Block (Plain Block)
KSFXPBT1 - 1 x Pulley Block (with Beckett)
KSFXPBT2 - 1 x Carbine Hook
KSFX9060 - 1 x Cross End Cleat
KSFX414D - 2 x Length of braided rope
KSFX5MWW